through-feed grinding

Finally, a remarkably improved transmission performance of the EG-FPF is obtained by thinning the substrate down to a suitable thickness range through well-controlled grinding and polishing.

最后，在实验上通过对衬底的研磨和抛光，将其减薄到一定的厚度范围内，从而使得该滤波器的传输性能得到极大改善。

Research of Cleaning Effect and Cell Parameter Modification through Us Cleaning after LCD Edge Grinding

液晶显示器磨边后超声波清洗及STN液晶盒设计优化的研究

The free through-feed grinding method is adopted to grind the OD of small sized non-symmetric spherical rollers on centerless CD grinder with common corundum guide wheels, i. e. grinding slopes with same angle but different length on both sides first, then going on through-feed grinding.

采用自由贯穿磨削方法，在无心外圆磨床上用普通砂质导轮磨削小型非对称球面滚子外径，即先在圆柱滚子两端磨出角度相同但长度不同的斜度，然后进行贯穿磨削。

Through observing the microcosmic image and back-scattered three-dimensional picture of the ground surface of polycrystalline diamond ( PCD), this paper studied the grinding mechanism of PCD material.

本文通过观察聚晶金刚石（PCD）磨削表面的微观形貌及背散射立体像，研究了PCD材料的磨削机理。

UV cured material was prepared with carborundum, SiO_2 and photopolymer resin. The performance of the cured material were studied through DSC and TG according to the special instance when it is used as grinding wheel.

该文对以金刚砂为磨料、SiO2为填充物、光固化树脂为结合剂的超薄砂轮光固化材料进行了DSC、TG分析。

Through CNC-PLC data and tache of signal disposals of simulation unit, principal axis AC motors is controlled by transducer. hence, the constant thread speed of grinding wheel combining with the principal axis motor is gained.

采用CNC-PLC模拟量单元的数据及信号处理环节，用变频器来实现对砂轮主轴电机的控制，从而保证砂轮以恒定的线速度进行研磨加工。